2x 60cm Switchback Headlight LED Strip DRL Daytime Light For Audi-Style Tube

Description

DRL Sequential Turn Signal Led Light Strip 2pcs Set Day Time Ruining Light (Color  White-Amber )
Link For Other Colors
YELLOW - RED  (amber - red)
https://www.ebay.com/itm/223971932405
RED - RED
https://www.ebay.com/itm/224176566084
100% Brand new & High quality universal  DAYTIME DRIVING LIGHT.
* This new Flexible Tube Design Switchback LED is for headlight project Audi Style effect. Uses powerful SMD LED in a strip. Can be used for numerous other lighting designs. 12 Volt DC Operation can be wired into your existing car lights or other projects.
* Ultra Bright SMD White LED lights to be used as daytime running lights and Amber Yellow LED lights to be used as turn signal lights
Features:
。 Color: Dual Color White & Amber LED strips
。  Working Voltage: 12V （Suitable for DC 12V power supply only）.
。  LED Tube Length: 60cm(23.62in)
。  Material: LED Strip with soft rubber tube
。  DRL strip for cars or headlights customization
。  HQ Dual Color LED Strip
。  Soft any shaping
Installation：
Red wires = Positive for White
Yellow wires = Positive for amber
Black wire = Ground
Can Be use/install inside or Outside the existing lights or any other part of the vehicle. If installing inside the headlights lights it will require you to open up the Headlight and reseal them. You may install them yourself but we HIGHLY recommend professional installation. Instructions are NOT included. We do not take any responsibility for any damage or labor that is involved with the installation of this product. Please make sure that you test the lights prior to installing to ensure they are working before proceeding with any type of work..
Compatibility:
This is universal switchback tube can fit any vehicles ,if the length suitable for you.
Feature:
High performance LED, long lifespan, superior illumination & stability
High luminous efficiency with high brightness light output
Environmental-friendly: energy saving, no UV and IR radiation, shock-proof and anti-corrosion.
Faster on/off response time and vibration resistant
NOTE:
The LED strip is flexible, but CANNOT be folded, which will damage the circuit.
The LED strip can be installed in two ways:
Open the headlight and put them inside. Specific care should be taken during operation.
Stick them with 3M adhesive tape directly to the headlight. Firm and durable 3M tape to finish the job, All the exposure to the wire should be seal with silicone gel or other covering to keep away the water or rain.
We try our best to provide as much information as we could. But damage due to wrong operation is NOT covered here.
This light bar is waterproof,but can't be used underwater.
Warning:
Need open the headlight assembly to install them,We highly recommended completed installation by professional technicians.
Package Includes:
2 x LED Strip