Siser EasyWeed Electric Iron On HTV 15" x 12" (1 Foot) Select Your Colors!

Description

Specifications: PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
COLOR CHART
SISER EASYWEED™ ELECTRIC 15" (14.75" ACTUAL SIZE)
ROSE GOLD
ORANGE
YELLOW
RED
PINK
CHERRY
PURPLE
BLUE
COLUMBIA BLUE
TEAL
LIME
OLIVE
COPPER
SILVER LENS
GOLD LENS
GREEN LENS
GREEN
PEARL
TUNGSTEN
GRAPE
CRANBERRY
PEACH FUZZ
FROSTED BLUEBERRY
SPEARMINT
PEACOCK TEAL
WHITE OPAL
Cutter Setting
Cricut®
Silhouette Cameo
Scan N Cut
Roland GS/GX-24
Graphtec
Blade: Standard
Setting: Iron-on
Blade: Standard, 3
Setting: Heat Transfer
Material: smooth
Speed: 8
Force: 6
Blade: Standard,2
Cut Speed: 1
Cut Pressure: 1
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s
Application Instructions
Application instructions(home iron)
Application Instructions(heat press)
Set iron dial between Cotton and Linen.
Cover design with Kraft paper or non-stick cover sheet.
Place on flat, hard surface (ironing board not recommended).
Press iron with medium/firm pressure (do not slide iron).
Press each section of design for 15 seconds.
If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds.
Peel carrier hot or cold
Cut in Reverse.
Weed excess material.
Preheat garment for 2-3 seconds.
Apply design at 305°F/150°C.
Use medium pressure for 10-15 seconds.
Peel carrier hot or cold.
Recommended Accessories & Care
Easyweed Electric Applies to
Recommended Accessories
Laundering
100% cotton
100% polyester
Poly/cotton blends
Leather
Siser Weeder
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Payment
Shipping
Same Day or 1 day Shipping for orders placed
before 3:00 PM (Monday-Friday)
2-4 business day transit time.
See map above
Payment and Return/Exchange
Change pick up hours to Monday-Friday 8:00-4:00.
Same day pick up as long as order is placed
before 3:00 PM.
Please bring valid ID and invoice.