TESIRAFORTE DAN TI- BIAMP DSP Fixed I/O Server w/ 32 X 32 Channel DANTE

Description

The TesiraFORTÉ DAN TI is a digital audio server with 32 bi-directional channels of Dante™ digital audio, 12 analog inputs with Acoustic Echo Cancellation (AEC), and 8 analog outputs. It also includes up to 8 channels of configurable USB audio and a standard FXO telephone interface via a RJ-11 connector. USB audio allows TesiraFORTÉ to interface directly with USB audio hosts, as well as to take full advantage of modern conferencing solutions. TesiraFORTÉ DAN TI provides extensive audio processing, including but not limited to: signal routing and mixing, equalization, filtering, dynamics, and delay; as well as control, monitoring, and diagnostic tools; all configured through the Tesira configuration software. TesiraFORTÉ DAN TI is best suited for rooms requiring AEC, voice lift, and mix-minus, such as conference rooms or distance learning environments that require an analog telephone connection.
BENEFITS
• Efficient system design, configuration, and installation with application-specific models
• Superior call quality with Acoustic Echo Cancellation
• Enhanced speech detection and processing
• Seamless integration with soft codec conferencing technologies via USB audio input
• Simpler installation process using the default configuration file
FEATURES
• 32x32 channels of digital audio networking via the Dante protocol
• 12 mic/line level inputs with AEC, 8 mic/line level outputs
• 2 Gigabit Ethernet ports: Dante digital audio and Tesira control
• Up to 8 channels of configurable USB audio
• RS-232 serial port
• 4-pin GPIO
• 2-line OLED display with capacitive-touch navigation
• Rack mountable (1RU)
• System configuration and control via Ethernet
• Internal universal power supply
• Standard FXO telephone interface via RJ-11 connector
• Signal processing via intuitive software allows configuration and control for signal routing, mixing,
equalization, filtering, delay, and much more
• CE marked, UL listed, and RoHS compliant
SPECIFICATIONS
Frequency Response: (20Hz to 20kHz ,+4dBu output) +0.25dB/-0.5dB
THD+N (22Hz to 22kHz):
0dB gain, +4dBu input- < 0.006%
54dB gain, -50dBu input- < 0.040%
EIN (no weighting, 22Hz to 22kHz): < -125dBu
Dynamic Range (in presence of signal):
22Hz to 22kHz, 0dB gain- > 108dB
Input Impedance (balanced): 8kΩ
Output Impedance (balanced): 207Ω
Maximum Input: +24dBu
Maximum Output (selectable): +24dBu, +18dBu, +12dBu,
+6dBu , 0dBu, -31dBu
Input Gain Range: (6dB steps): 0dB to 66dB
Overall Dimensions/Weight:
Height: 1.75 inches (44 mm)
Width: 19.0 inches (483 mm)
Depth: 10.5 inches (267 mm)
Weight: 8 lbs (3.63 kg)
Phantom Power: +48 VDC (7mA/input)
Crosstalk, channel to channel, 1kHz:
0dB gain, +4dBu input- < -85dB
54dB gain, -50dBu input- < -75dB
Sampling Rate: 48kHz
A/D – D/A Converters: 24-bit
Power Consumption
(100-240VAC 50/60Hz): < 35W
USB:
Bit Depth: 16- or 24-bit
Number of Channels: up to 8
Sample Rate: 48kHz
Compliance:
FCC Part 15B (USA)
FCC Part 68 (USA)
Industry Canada CS-03 (Canada)
CE marked (Europe)
UL and C-UL listed (USA & Canada)
RCM (Australia)
RoHS Directive (Europe)
ARCHITECTS & ENGINEERS SPECIFICATION
The digital audio network server shall be designed exclusively for use with Tesira systems. The server shall support Dante™ digital audio networking that shall allow up to 32 x 32 channels. The Dante Networking connection shall be implemented on a RJ-45 connector. The server shall support Ethernet connection for programming and control on a RJ-45 connector. The server shall have internal DSP processing. The server shall include 4 channels of General Purpose Input and Output connection (GPIO) for sending or receiving logic signals. The programming of the GPIO ports shall be software configurable. The server shall include a RS-232 connection for control data transmission into or out of the server and such operation shall be software programmable. The server shall include a Universal Serial Bus (USB) connection on a standard USB-B type connector. The server shall be software configurable to stream up to 8 channels of digital USB Class 1 Audio transmission either into or out of the server or simultaneous input and output. The server shall provide 12 balanced input connections for receiving of microphone or line level analog audio signals on screw-down, removable connectors. The input connections shall include Acoustic Echo Cancellation (AEC) hardware and firmware, the parameters, routing and operation of which shall be software programmable. The server shall provide 8 balanced output channels for the transmission of microphone or line level analog audio signals on screw-down, removable connectors. Each individual channel shall have its own dedicated connection. Each individual channel shall have its own dedicated connection. The server shall integrate to standard telephony communications on a RJ-11 connector for a single line of telephone communication. The server shall provide front panel OLED identification of server power, status, alarm, and activity as well as system-wide alarm. The server shall be rack mountable (1RU) and feature software-configurable signal processing, including but not limited to: signal routing and mixing, equalization, filtering, dynamics, and delay, as well as control, monitoring, and diagnostic tools. The server shall be CE marked, UL listed and shall be compliant with the RoHS directive